Minimum
SCPI Command :
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:PVTime:MINimum
- class MinimumCls[source]
Minimum commands group definition. 1 total commands, 0 Subgroups, 1 group commands
- class FetchStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Seg_Reliability: int: decimal Reliability indicator for the segment. The meaning of the returned values is the same as for the common reliability indicator, see previous parameter.
Out_Of_Tol: float: float Percentage of measured bursts with failed limit check Range: 0 % to 100 %
Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Peak_Power: float: float Peak power Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Leakage_Power: float: float Leakage power (BR, LE) Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Gfsk_Power: float: float Average power within the GFSK modulated part of the burst (EDR) Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Dpsk_Power: float: float Average power within the DPSK modulated part of the burst (EDR) Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Dpsk_Minus_Gfsk: float: float Difference between the 8_DPSKPower and 7_GFSKPower (EDR) Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Guard_Period: float: float Length of the guard band between the packet header and the EDR synchronization sequence (EDR) Range: 0 µs to 9.99 µs, Unit: s
Peak_Minus_Avg: float: float Difference between the peak power and the average power in the burst (LE) Range: -99.99 dBm to 99.99 dBm, Unit: dBm
- fetch(segment=Segment.Default) FetchStruct [source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>:PVTime:MINimum value: FetchStruct = driver.multiEval.listPy.segment.powerVsTime.minimum.fetch(segment = repcap.Segment.Default)
Returns statistical power vs time single value results for segment<no> in list mode. The command returns all parameters listed below, independent of the selected list mode setup. However, only for some of the parameters measured values are available. For the other parameters, only an indicator is returned (e.g. NAV) .
- param segment:
optional repeated capability selector. Default value: S1 (settable in the interface ‘Segment’)
- return:
structure: for return value, see the help for FetchStruct structure arguments.