RsCmwBluetoothMeas API Structure
Global RepCaps
driver = RsCmwBluetoothMeas('TCPIP::192.168.2.101::hislip0')
# Instance range: Inst1 .. Inst16
rc = driver.repcap_instance_get()
driver.repcap_instance_set(repcap.Instance.Inst1)
- class RsCmwBluetoothMeas(resource_name: str, id_query: bool = True, reset: bool = False, options: str = None, direct_session: object = None)[source]
1209 total commands, 14 Subgroups, 0 group commands
Initializes new RsCmwBluetoothMeas session.
- Parameter options tokens examples:
Simulate=True
- starts the session in simulation mode. Default:False
SelectVisa=socket
- uses no VISA implementation for socket connections - you do not need any VISA-C installationSelectVisa=rs
- forces usage of RohdeSchwarz VisaSelectVisa=ivi
- forces usage of National Instruments VisaQueryInstrumentStatus = False
- same asdriver.utilities.instrument_status_checking = False
. Default:True
WriteDelay = 20, ReadDelay = 5
- Introduces delay of 20ms before each write and 5ms before each read. Default:0ms
for bothOpcWaitMode = OpcQuery
- mode for all the opc-synchronised write/reads. Other modes: StbPolling, StbPollingSlow, StbPollingSuperSlow. Default:StbPolling
AddTermCharToWriteBinBLock = True
- Adds one additional LF to the end of the binary data (some instruments require that). Default:False
AssureWriteWithTermChar = True
- Makes sure each command/query is terminated with termination character. Default: Interface dependentTerminationCharacter = "\r"
- Sets the termination character for reading. Default:\n
(LineFeed or LF)DataChunkSize = 10E3
- Maximum size of one write/read segment. If transferred data is bigger, it is split to more segments. Default:1E6
bytesOpcTimeout = 10000
- same as driver.utilities.opc_timeout = 10000. Default:30000ms
VisaTimeout = 5000
- same as driver.utilities.visa_timeout = 5000. Default:10000ms
ViClearExeMode = Disabled
- viClear() execution mode. Default:execute_on_all
OpcQueryAfterWrite = True
- same as driver.utilities.opc_query_after_write = True. Default:False
StbInErrorCheck = False
- if true, the driver checks errors with *STB? If false, it uses SYST:ERR?. Default:True
ScpiQuotes = double'. - for SCPI commands, you can define how strings are quoted. With single or double quotes. Possible values: single | double | {char}. Default: ``single
LoggingMode = On
- Sets the logging status right from the start. Default:Off
LoggingName = 'MyDevice'
- Sets the name to represent the session in the log entries. Default:'resource_name'
LogToGlobalTarget = True
- Sets the logging target to the class-property previously set with RsCmwBluetoothMeas.set_global_logging_target() Default:False
LoggingToConsole = True
- Immediately starts logging to the console. Default: FalseLoggingToUdp = True
- Immediately starts logging to the UDP port. Default: FalseLoggingUdpPort = 49200
- UDP port to log to. Default: 49200
- Parameters:
resource_name – VISA resource name, e.g. ‘TCPIP::192.168.2.1::INSTR’
id_query – if True, the instrument’s model name is verified against the models supported by the driver and eventually throws an exception.
reset – Resets the instrument (sends *RST command) and clears its status sybsystem.
options – string tokens alternating the driver settings.
direct_session – Another driver object or pyVisa object to reuse the session instead of opening a new session.
- static assert_minimum_version(min_version: str) None [source]
Asserts that the driver version fulfills the minimum required version you have entered. This way you make sure your installed driver is of the entered version or newer.
- classmethod clear_global_logging_relative_timestamp() None [source]
Clears the global relative timestamp. After this, all the instances using the global relative timestamp continue logging with the absolute timestamps.
- close() None [source]
Closes the active RsCmwBluetoothMeas session.
- classmethod from_existing_session(session: object, options: str = None) RsCmwBluetoothMeas [source]
Creates a new RsCmwBluetoothMeas object with the entered ‘session’ reused.
- Parameters:
session – can be another driver or a direct pyvisa session.
options – string tokens alternating the driver settings.
- classmethod get_global_logging_relative_timestamp() datetime [source]
Returns global common relative timestamp for log entries.
- classmethod get_global_logging_target()[source]
Returns global common target stream.
- get_session_handle() object [source]
Returns the underlying session handle.
- get_total_execution_time() timedelta [source]
Returns total time spent by the library on communicating with the instrument. This time is always shorter than get_total_time(), since it does not include gaps between the communication. You can reset this counter with reset_time_statistics().
- get_total_time() timedelta [source]
Returns total time spent by the library on communicating with the instrument. This time is always shorter than get_total_time(), since it does not include gaps between the communication. You can reset this counter with reset_time_statistics().
- static list_resources(expression: str = '?*::INSTR', visa_select: str = None) List[str] [source]
- Finds all the resources defined by the expression
‘?*’ - matches all the available instruments
‘USB::?*’ - matches all the USB instruments
‘TCPIP::192?*’ - matches all the LAN instruments with the IP address starting with 192
- reset_time_statistics() None [source]
Resets all execution and total time counters. Affects the results of get_total_time() and get_total_execution_time()
- restore_all_repcaps_to_default() None [source]
Sets all the Group and Global repcaps to their initial values
- classmethod set_global_logging_relative_timestamp(timestamp: datetime) None [source]
Sets global common relative timestamp for log entries. To use it, call the following: io.utilities.logger.set_relative_timestamp_global()
- classmethod set_global_logging_relative_timestamp_now() None [source]
Sets global common relative timestamp for log entries to this moment. To use it, call the following: io.utilities.logger.set_relative_timestamp_global().
- classmethod set_global_logging_target(target) None [source]
Sets global common target stream that each instance can use. To use it, call the following: io.utilities.logger.set_logging_target_global(). If an instance uses global logging target, it automatically uses the global relative timestamp (if set). You can set the target to None to invalidate it.
Subgroups
- Call
- Clean
- Configure
- Diagnostic
- DtMode
- Hdr
- Hdrp
- InputSignal
- MultiEval
- Route
- RxQuality
- Sense
- Trigger
- Trx