Xmaximum
SCPI Commands :
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum
- class XmaximumCls[source]
Xmaximum commands group definition. 3 total commands, 0 Subgroups, 3 group commands
- class CalculateStruct[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %
Delta_F_299_P_9: float or bool: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Freq_Accuracy: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Max_Drift: float or bool: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs
Freq_Dev_Avg_F_1: float or bool: No parameter help available
Freq_Dev_Min_F_1: float or bool: No parameter help available
Freq_Dev_Max_F_1: float or bool: No parameter help available
Freq_Dev_Avg_F_2: float or bool: No parameter help available
Freq_Dev_Min_F_2: float or bool: No parameter help available
Freq_Dev_Max_F_2: float or bool: No parameter help available
Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Mod_Ratio: enums.ResultStatus2: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1
Freq_Offset: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Init_Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- class ResultData[source]
Response structure. Fields:
Reliability: int: decimal ‘Reliability indicator’
Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %
Delta_F_299_P_9: float: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs
Freq_Dev_Avg_F_1: float: No parameter help available
Freq_Dev_Min_F_1: float: No parameter help available
Freq_Dev_Max_F_1: float: No parameter help available
Freq_Dev_Avg_F_2: float: No parameter help available
Freq_Dev_Min_F_2: float: No parameter help available
Freq_Dev_Max_F_2: float: No parameter help available
Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm
Mod_Ratio: float: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1
Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
Init_Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- calculate() CalculateStruct [source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum value: CalculateStruct = driver.multiEval.modulation.lowEnergy.le2M.xmaximum.calculate()
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) , see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for CalculateStruct structure arguments.
- fetch() ResultData [source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum value: ResultData = driver.multiEval.modulation.lowEnergy.le2M.xmaximum.fetch()
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) , see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.
- read() ResultData [source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMAXimum value: ResultData = driver.multiEval.modulation.lowEnergy.le2M.xmaximum.read()
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) , see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.
- return:
structure: for return value, see the help for ResultData structure arguments.