Maximum

SCPI Commands :

READ:BLUetooth:MEASurement<Instance>:MEValuation:TRACe:SACP:MAXimum
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:TRACe:SACP:MAXimum
class MaximumCls[source]

Maximum commands group definition. 2 total commands, 0 Subgroups, 2 group commands

fetch() → List[float][source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:TRACe:SACP:MAXimum
value: List[float] = driver.multiEval.trace.sacp.maximum.fetch()


    INTRO_CMD_HELP: Returns the current, average and maximum values of the 'Spectrum ACP' traces for BR and LE packets. The number of returned values depends on the current burst type.

    - For BR bursts, the trace returns 79 values.The number of valid ACP results depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.Brate.Measurement.mode) :
    Table Header:

    - In CH21 mode ('ACP +/- 10 Channels') , the first 21 ACP values contain results for the relative channels –10, ..., 0, ..., +10; the remaining 58 values are not displayed.
    - In CH79 mode ('ACP 79 Channels') , valid ACP values are available for all 79 Bluetooth channels (2402 MHz, 2403 MHz, ..., 2480 MHz)
    - For LE bursts, the trace returns 81 values.The number of valid ACP results

depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.LowEnergy.Le2M.Measurement.mode) :

Table Header:

  • In CH10 mode (‘ACP +/- 5 Channels’) , the first 21 ACP values contain results for the 1 MHz channels centered at fTX – 10 MHz, fTX – 9 MHz, …, fTX + 10 MHz. The remaining 58 values are invalid (NAV) . This mode is applicable to all types of LE bursts.

  • In CH40 mode (‘LE All Channels’) , ACP values 1 to 81 contain results for the 1 MHz channels centered at 2401 MHz, 2402 MHz, …, 2481 MHz This mode is only applicable to test packets using LE 1M PHY or LE 2M PHY.

Use RsCmwBluetoothMeas.reliability.last_value to read the updated reliability indicator.

return:

acp: float 79 ACP values for BR, 81 ACP values for LE Range: -99.99 dBm to 99.99 dBm

read() → List[float][source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:TRACe:SACP:MAXimum
value: List[float] = driver.multiEval.trace.sacp.maximum.read()


    INTRO_CMD_HELP: Returns the current, average and maximum values of the 'Spectrum ACP' traces for BR and LE packets. The number of returned values depends on the current burst type.

    - For BR bursts, the trace returns 79 values.The number of valid ACP results depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.Brate.Measurement.mode) :
    Table Header:

    - In CH21 mode ('ACP +/- 10 Channels') , the first 21 ACP values contain results for the relative channels –10, ..., 0, ..., +10; the remaining 58 values are not displayed.
    - In CH79 mode ('ACP 79 Channels') , valid ACP values are available for all 79 Bluetooth channels (2402 MHz, 2403 MHz, ..., 2480 MHz)
    - For LE bursts, the trace returns 81 values.The number of valid ACP results

depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.LowEnergy.Le2M.Measurement.mode) :

Table Header:

  • In CH10 mode (‘ACP +/- 5 Channels’) , the first 21 ACP values contain results for the 1 MHz channels centered at fTX – 10 MHz, fTX – 9 MHz, …, fTX + 10 MHz. The remaining 58 values are invalid (NAV) . This mode is applicable to all types of LE bursts.

  • In CH40 mode (‘LE All Channels’) , ACP values 1 to 81 contain results for the 1 MHz channels centered at 2401 MHz, 2402 MHz, …, 2481 MHz This mode is only applicable to test packets using LE 1M PHY or LE 2M PHY.

Use RsCmwBluetoothMeas.reliability.last_value to read the updated reliability indicator.

return:

acp: float 79 ACP values for BR, 81 ACP values for LE Range: -99.99 dBm to 99.99 dBm