Per

SCPI Commands :

CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LEVel
CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:TXPackets
CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LIMit

class PerCls[source]

Per commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_level() → float[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LEVel
value: float = driver.configure.rxQuality.per.get_level()

Sets the Tx level of R&S CMW for PER measurements. The allowed value range can be calculated as follows: Range (Level) = Range (Output Power) - External Attenuation Range (Output Power) = -130 dBm to 0 dBm (RFx COM) or -120 dBm to 8 dBm (RFx OUT) ; please also notice the ranges quoted in the data sheet.

return:

level: numeric Range: see above

get_limit() → float[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LIMit
value: float or bool = driver.configure.rxQuality.per.get_limit()

No command help available

return:

limit: (float or boolean) No help available

get_tx_packets() → int[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:TXPackets
value: int = driver.configure.rxQuality.per.get_tx_packets()

Sets number of packets for PER measurements.

return:

packets_to_send: numeric Range: 1 to 100E+3

set_level(level: float) → None[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LEVel
driver.configure.rxQuality.per.set_level(level = 1.0)

Sets the Tx level of R&S CMW for PER measurements. The allowed value range can be calculated as follows: Range (Level) = Range (Output Power) - External Attenuation Range (Output Power) = -130 dBm to 0 dBm (RFx COM) or -120 dBm to 8 dBm (RFx OUT) ; please also notice the ranges quoted in the data sheet.

param level:

numeric Range: see above

set_limit(limit: float) → None[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:LIMit
driver.configure.rxQuality.per.set_limit(limit = 1.0)

No command help available

param limit:

(float or boolean) No help available

set_tx_packets(packets_to_send: int) → None[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:RXQuality:PER:TXPackets
driver.configure.rxQuality.per.set_tx_packets(packets_to_send = 1)

Sets number of packets for PER measurements.

param packets_to_send:

numeric Range: 1 to 100E+3