Le1M

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
class Le1MCls[source]

Le1M commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm

  • No_Of_Exceptions: float or bool: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm

  • No_Of_Exceptions: int: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
value: CalculateStruct = driver.multiEval.sacp.lowEnergy.le1M.calculate()

Returns the ‘Spectrum ACP’ results for LE1M. See ‘View Spectrum ACP’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
value: ResultData = driver.multiEval.sacp.lowEnergy.le1M.fetch()

Returns the ‘Spectrum ACP’ results for LE1M. See ‘View Spectrum ACP’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:LENergy[:LE1M]
value: ResultData = driver.multiEval.sacp.lowEnergy.le1M.read()

Returns the ‘Spectrum ACP’ results for LE1M. See ‘View Spectrum ACP’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.