Ptx

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
class PtxCls[source]

Ptx commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Sacp CMDLINKRESOLVED]) exceeding the specified limits. Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • No_Of_Exceptions: float or bool: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

  • Acp: List[float or bool]: float 79 ACP results Range: -99.99 dBm to 99.99 dBm, Unit: dBm

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Sacp CMDLINKRESOLVED]) exceeding the specified limits. Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • No_Of_Exceptions: int: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

  • Acp: List[float]: float 79 ACP results Range: -99.99 dBm to 99.99 dBm, Unit: dBm

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
value: CalculateStruct = driver.multiEval.sacp.brate.ptx.calculate()

Returns the ‘Spectrum ACP’ results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

INTRO_CMD_HELP: The number of valid ACP results depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.Brate.Measurement.mode CH21 | CH79) :

  • If ‘ACP +/- 10 Channels’ is selected, the first 21 ACP values contain the results for the relative channels –10, …, 0, …, +10; the remaining 58 values are not displayed.

  • If ‘ACP 79 Channels’ is selected, valid ACP values are available for all channels in the Bluetooth regulatory range.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
value: ResultData = driver.multiEval.sacp.brate.ptx.fetch()

Returns the ‘Spectrum ACP’ results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

INTRO_CMD_HELP: The number of valid ACP results depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.Brate.Measurement.mode CH21 | CH79) :

  • If ‘ACP +/- 10 Channels’ is selected, the first 21 ACP values contain the results for the relative channels –10, …, 0, …, +10; the remaining 58 values are not displayed.

  • If ‘ACP 79 Channels’ is selected, valid ACP values are available for all channels in the Bluetooth regulatory range.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:BRATe[:PTX]
value: ResultData = driver.multiEval.sacp.brate.ptx.read()

Returns the ‘Spectrum ACP’ results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

INTRO_CMD_HELP: The number of valid ACP results depends on the ACP measurement mode (method RsCmwBluetoothMeas.Configure.MultiEval.Sacp.Brate.Measurement.mode CH21 | CH79) :

  • If ‘ACP +/- 10 Channels’ is selected, the first 21 ACP values contain the results for the relative channels –10, …, 0, …, +10; the remaining 58 values are not displayed.

  • If ‘ACP 79 Channels’ is selected, valid ACP values are available for all channels in the Bluetooth regulatory range.

return:

structure: for return value, see the help for ResultData structure arguments.