Maximum

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
READ:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
class MaximumCls[source]

Maximum commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#SoBw CMDLINKRESOLVED]) exceeding the specified limit. ([CMDLINKRESOLVED Configure.MultiEval.Limit.SoBw#set CMDLINKRESOLVED]) Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Peak_Emission: float or bool: float Peak power in the measured spectral range Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Fl: float or bool: float Lower frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

  • Fh: float or bool: float Higher frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz

  • Fh_Min_Fl: float or bool: float 20 dB bandwidth; difference between fH – fL. Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

class FetchStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#SoBw CMDLINKRESOLVED]) exceeding the specified limit. ([CMDLINKRESOLVED Configure.MultiEval.Limit.SoBw#set CMDLINKRESOLVED]) Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Peak_Emission: float: float Peak power in the measured spectral range Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Fl: float: float Lower frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

  • Fh: float: float Higher frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz

  • Fh_Min_Fl: float: float 20 dB bandwidth; difference between fH – fL. Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

class ReadStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#SoBw CMDLINKRESOLVED]) exceeding the specified limit. ([CMDLINKRESOLVED Configure.MultiEval.Limit.SoBw#set CMDLINKRESOLVED]) Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Peak_Emission: float: float Peak power in the measured spectral range Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Fl: float: float Lower frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

  • Fh: float: float Higher frequency where the transmit power drops 20 dB below the peak emission Range: -0.99999E+6 MHz to 0.99999E+6 MHz

  • Fh_Min_Fl: float: float 20 dB bandwidth; difference between fH – fL. Range: -0.99999E+6 MHz to 0.99999E+6 MHz, Unit: Hz

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
value: CalculateStruct = driver.multiEval.soBw.brate.maximum.calculate()

Returns the ‘Spectrum 20 dB Bandwidth’ results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → FetchStruct[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
value: FetchStruct = driver.multiEval.soBw.brate.maximum.fetch()

Returns the ‘Spectrum 20 dB Bandwidth’ results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for FetchStruct structure arguments.

read() → ReadStruct[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:SOBW:BRATe:MAXimum
value: ReadStruct = driver.multiEval.soBw.brate.maximum.read()

Returns the ‘Spectrum 20 dB Bandwidth’ results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ReadStruct structure arguments.