Average

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits. Range: 0 % to 100 %, Unit: %

  • Delta_F_299_P_9: float or bool: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float or bool: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float or bool: No parameter help available

  • Freq_Dev_Min_F_1: float or bool: No parameter help available

  • Freq_Dev_Max_F_1: float or bool: No parameter help available

  • Freq_Dev_Avg_F_2: float or bool: No parameter help available

  • Freq_Dev_Min_F_2: float or bool: No parameter help available

  • Freq_Dev_Max_F_2: float or bool: No parameter help available

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Mod_Ratio: enums.ResultStatus2: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits. Range: 0 % to 100 %, Unit: %

  • Delta_F_299_P_9: float: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float: No parameter help available

  • Freq_Dev_Min_F_1: float: No parameter help available

  • Freq_Dev_Max_F_1: float: No parameter help available

  • Freq_Dev_Avg_F_2: float: No parameter help available

  • Freq_Dev_Min_F_2: float: No parameter help available

  • Freq_Dev_Max_F_2: float: No parameter help available

  • Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Mod_Ratio: float: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
value: CalculateStruct = driver.multiEval.modulation.brate.average.calculate()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
value: ResultData = driver.multiEval.modulation.brate.average.fetch()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:BRATe:AVERage
value: ResultData = driver.multiEval.modulation.brate.average.read()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for BR packets. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.