from typing import ClassVar, List
from .Internal.Core import Core
from .Internal.InstrumentErrors import RsInstrException
from .Internal.CommandsGroup import CommandsGroup
from .Internal.VisaSession import VisaSession
from datetime import datetime, timedelta
from . import repcap
from .Internal.RepeatedCapability import RepeatedCapability
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]
class RsCmwBluetoothMeas:
"""1209 total commands, 14 Subgroups, 0 group commands"""
_driver_options = "SupportedInstrModels = CMW500/CMW100/CMW270/CMW280/CMP, SupportedIdnPatterns = CMW, SimulationIdnString = 'Rohde&Schwarz,CMW500,100001,4.0.110.0031'"
_global_logging_relative_timestamp: ClassVar[datetime] = None
_global_logging_target_stream: ClassVar = None
def __init__(self, resource_name: str, id_query: bool = True, reset: bool = False, options: str = None, direct_session: object = None):
"""Initializes new RsCmwBluetoothMeas session. \n
Parameter options tokens examples:
- ``Simulate=True`` - starts the session in simulation mode. Default: ``False``
- ``SelectVisa=socket`` - uses no VISA implementation for socket connections - you do not need any VISA-C installation
- ``SelectVisa=rs`` - forces usage of RohdeSchwarz Visa
- ``SelectVisa=ivi`` - forces usage of National Instruments Visa
- ``QueryInstrumentStatus = False`` - same as ``driver.utilities.instrument_status_checking = False``. Default: ``True``
- ``WriteDelay = 20, ReadDelay = 5`` - Introduces delay of 20ms before each write and 5ms before each read. Default: ``0ms`` for both
- ``OpcWaitMode = OpcQuery`` - mode for all the opc-synchronised write/reads. Other modes: StbPolling, StbPollingSlow, StbPollingSuperSlow. Default: ``StbPolling``
- ``AddTermCharToWriteBinBLock = True`` - Adds one additional LF to the end of the binary data (some instruments require that). Default: ``False``
- ``AssureWriteWithTermChar = True`` - Makes sure each command/query is terminated with termination character. Default: Interface dependent
- ``TerminationCharacter = "\\r"`` - Sets the termination character for reading. Default: ``\\n`` (LineFeed or LF)
- ``DataChunkSize = 10E3`` - Maximum size of one write/read segment. If transferred data is bigger, it is split to more segments. Default: ``1E6`` bytes
- ``OpcTimeout = 10000`` - same as driver.utilities.opc_timeout = 10000. Default: ``30000ms``
- ``VisaTimeout = 5000`` - same as driver.utilities.visa_timeout = 5000. Default: ``10000ms``
- ``ViClearExeMode = Disabled`` - viClear() execution mode. Default: ``execute_on_all``
- ``OpcQueryAfterWrite = True`` - same as driver.utilities.opc_query_after_write = True. Default: ``False``
- ``StbInErrorCheck = False`` - if true, the driver checks errors with *STB? If false, it uses SYST:ERR?. Default: ``True``
- ``ScpiQuotes = double'. - for SCPI commands, you can define how strings are quoted. With single or double quotes. Possible values: single | double | {char}. Default: ``single``
- ``LoggingMode = On`` - Sets the logging status right from the start. Default: ``Off``
- ``LoggingName = 'MyDevice'`` - Sets the name to represent the session in the log entries. Default: ``'resource_name'``
- ``LogToGlobalTarget = True`` - Sets the logging target to the class-property previously set with RsCmwBluetoothMeas.set_global_logging_target() Default: ``False``
- ``LoggingToConsole = True`` - Immediately starts logging to the console. Default: False
- ``LoggingToUdp = True`` - Immediately starts logging to the UDP port. Default: False
- ``LoggingUdpPort = 49200`` - UDP port to log to. Default: 49200
:param resource_name: VISA resource name, e.g. 'TCPIP::192.168.2.1::INSTR'
:param id_query: if True, the instrument's model name is verified against the models supported by the driver and eventually throws an exception.
:param reset: Resets the instrument (sends *RST command) and clears its status sybsystem.
:param options: string tokens alternating the driver settings.
:param direct_session: Another driver object or pyVisa object to reuse the session instead of opening a new session."""
self._core = Core(resource_name, id_query, reset, RsCmwBluetoothMeas._driver_options, options, direct_session)
self._core.driver_version = '4.0.110.0031'
self._options = options
self._add_all_global_repcaps()
self._custom_properties_init()
self.utilities.default_instrument_setup()
# noinspection PyTypeChecker
self._cmd_group = CommandsGroup("ROOT", self._core, None)
[docs]
@classmethod
def from_existing_session(cls, session: object, options: str = None) -> 'RsCmwBluetoothMeas':
"""Creates a new RsCmwBluetoothMeas object with the entered 'session' reused. \n
:param session: can be another driver or a direct pyvisa session.
:param options: string tokens alternating the driver settings."""
# noinspection PyTypeChecker
resource_name = None
if hasattr(session, 'resource_name'):
resource_name = getattr(session, 'resource_name')
return cls(resource_name, False, False, options, session)
[docs]
@classmethod
def set_global_logging_target(cls, target) -> None:
"""Sets global common target stream that each instance can use. To use it, call the following: io.utilities.logger.set_logging_target_global().
If an instance uses global logging target, it automatically uses the global relative timestamp (if set).
You can set the target to None to invalidate it."""
cls._global_logging_target_stream = target
[docs]
@classmethod
def get_global_logging_target(cls):
"""Returns global common target stream."""
return cls._global_logging_target_stream
[docs]
@classmethod
def set_global_logging_relative_timestamp(cls, timestamp: datetime) -> None:
"""Sets global common relative timestamp for log entries. To use it, call the following: io.utilities.logger.set_relative_timestamp_global()"""
cls._global_logging_relative_timestamp = timestamp
[docs]
@classmethod
def set_global_logging_relative_timestamp_now(cls) -> None:
"""Sets global common relative timestamp for log entries to this moment.
To use it, call the following: io.utilities.logger.set_relative_timestamp_global()."""
cls._global_logging_relative_timestamp = datetime.now()
[docs]
@classmethod
def clear_global_logging_relative_timestamp(cls) -> None:
"""Clears the global relative timestamp. After this, all the instances using the global relative timestamp continue logging with the absolute timestamps."""
# noinspection PyTypeChecker
cls._global_logging_relative_timestamp = None
[docs]
@classmethod
def get_global_logging_relative_timestamp(cls) -> datetime or None:
"""Returns global common relative timestamp for log entries."""
return cls._global_logging_relative_timestamp
def __str__(self) -> str:
if self._core.io:
return f"RsCmwBluetoothMeas session '{self._core.io.resource_name}'"
else:
return f"RsCmwBluetoothMeas with session closed"
[docs]
def get_total_execution_time(self) -> timedelta:
"""Returns total time spent by the library on communicating with the instrument.
This time is always shorter than get_total_time(), since it does not include gaps between the communication.
You can reset this counter with reset_time_statistics()."""
return self._core.io.total_execution_time
[docs]
def get_total_time(self) -> timedelta:
"""Returns total time spent by the library on communicating with the instrument.
This time is always shorter than get_total_time(), since it does not include gaps between the communication.
You can reset this counter with reset_time_statistics()."""
return datetime.now() - self._core.io.total_time_startpoint
[docs]
def reset_time_statistics(self) -> None:
"""Resets all execution and total time counters. Affects the results of get_total_time() and get_total_execution_time()"""
self._core.io.reset_time_statistics()
[docs]
@staticmethod
def assert_minimum_version(min_version: str) -> None:
"""Asserts that the driver version fulfills the minimum required version you have entered.
This way you make sure your installed driver is of the entered version or newer."""
min_version_list = min_version.split('.')
curr_version_list = '4.0.110.0031'.split('.')
count_min = len(min_version_list)
count_curr = len(curr_version_list)
count = count_min if count_min < count_curr else count_curr
for i in range(count):
minimum = int(min_version_list[i])
curr = int(curr_version_list[i])
if curr > minimum:
break
if curr < minimum:
raise RsInstrException(f"Assertion for minimum RsCmwBluetoothMeas version failed. Current version: '4.0.110.0031', minimum required version: '{min_version}'")
[docs]
@staticmethod
def list_resources(expression: str = '?*::INSTR', visa_select: str = None) -> List[str]:
"""Finds all the resources defined by the expression
- '?*' - matches all the available instruments
- 'USB::?*' - matches all the USB instruments
- 'TCPIP::192?*' - matches all the LAN instruments with the IP address starting with 192
:param expression: see the examples in the function
:param visa_select: optional parameter selecting a specific VISA. Examples: '@ivi', '@rs'
"""
rm = VisaSession.get_resource_manager(visa_select)
resources = rm.list_resources(expression)
rm.close()
# noinspection PyTypeChecker
return resources
[docs]
def close(self) -> None:
"""Closes the active RsCmwBluetoothMeas session."""
self._core.io.close()
[docs]
def get_session_handle(self) -> object:
"""Returns the underlying session handle."""
return self._core.get_session_handle()
def _add_all_global_repcaps(self) -> None:
"""Adds all the repcaps defined as global to the instrument's global repcaps dictionary."""
self._core.io.add_global_repcap('<Instance>', RepeatedCapability("ROOT", 'repcap_instance_get', 'repcap_instance_set', repcap.Instance.Inst1))
def repcap_instance_get(self) -> repcap.Instance:
"""Returns Global Repeated capability Instance"""
return self._core.io.get_global_repcap_value('<Instance>')
def repcap_instance_set(self, value: repcap.Instance) -> None:
"""Sets Global Repeated capability Instance
Default value after init: Instance.Inst1"""
self._core.io.set_global_repcap_value('<Instance>', value)
def _custom_properties_init(self) -> None:
"""Adds all the interfaces that are custom for the driver."""
from .CustomFiles.utilities import Utilities
self.utilities = Utilities(self._core)
from .CustomFiles.events import Events
self.events = Events(self._core)
from .CustomFiles.reliability import Reliability
self.reliability = Reliability(self._core)
def _sync_to_custom_properties(self, cloned: 'RsCmwBluetoothMeas') -> None:
"""Synchronises the state of all the custom properties to the entered object."""
cloned.utilities.sync_from(self.utilities)
cloned.events.sync_from(self.events)
cloned.reliability.sync_from(self.reliability)
@property
def hdrp(self):
"""hdrp commands group. 6 Sub-classes, 3 commands."""
if not hasattr(self, '_hdrp'):
from .Implementations.Hdrp import HdrpCls
self._hdrp = HdrpCls(self._core, self._cmd_group)
return self._hdrp
@property
def trigger(self):
"""trigger commands group. 3 Sub-classes, 0 commands."""
if not hasattr(self, '_trigger'):
from .Implementations.Trigger import TriggerCls
self._trigger = TriggerCls(self._core, self._cmd_group)
return self._trigger
@property
def configure(self):
"""configure commands group. 10 Sub-classes, 5 commands."""
if not hasattr(self, '_configure'):
from .Implementations.Configure import ConfigureCls
self._configure = ConfigureCls(self._core, self._cmd_group)
return self._configure
@property
def route(self):
"""route commands group. 2 Sub-classes, 1 commands."""
if not hasattr(self, '_route'):
from .Implementations.Route import RouteCls
self._route = RouteCls(self._core, self._cmd_group)
return self._route
@property
def hdr(self):
"""hdr commands group. 7 Sub-classes, 3 commands."""
if not hasattr(self, '_hdr'):
from .Implementations.Hdr import HdrCls
self._hdr = HdrCls(self._core, self._cmd_group)
return self._hdr
@property
def multiEval(self):
"""multiEval commands group. 10 Sub-classes, 3 commands."""
if not hasattr(self, '_multiEval'):
from .Implementations.MultiEval import MultiEvalCls
self._multiEval = MultiEvalCls(self._core, self._cmd_group)
return self._multiEval
@property
def inputSignal(self):
"""inputSignal commands group. 1 Sub-classes, 0 commands."""
if not hasattr(self, '_inputSignal'):
from .Implementations.InputSignal import InputSignalCls
self._inputSignal = InputSignalCls(self._core, self._cmd_group)
return self._inputSignal
@property
def call(self):
"""call commands group. 1 Sub-classes, 0 commands."""
if not hasattr(self, '_call'):
from .Implementations.Call import CallCls
self._call = CallCls(self._core, self._cmd_group)
return self._call
@property
def dtMode(self):
"""dtMode commands group. 1 Sub-classes, 0 commands."""
if not hasattr(self, '_dtMode'):
from .Implementations.DtMode import DtModeCls
self._dtMode = DtModeCls(self._core, self._cmd_group)
return self._dtMode
@property
def sense(self):
"""sense commands group. 1 Sub-classes, 0 commands."""
if not hasattr(self, '_sense'):
from .Implementations.Sense import SenseCls
self._sense = SenseCls(self._core, self._cmd_group)
return self._sense
@property
def clean(self):
"""clean commands group. 1 Sub-classes, 0 commands."""
if not hasattr(self, '_clean'):
from .Implementations.Clean import CleanCls
self._clean = CleanCls(self._core, self._cmd_group)
return self._clean
@property
def diagnostic(self):
"""diagnostic commands group. 2 Sub-classes, 0 commands."""
if not hasattr(self, '_diagnostic'):
from .Implementations.Diagnostic import DiagnosticCls
self._diagnostic = DiagnosticCls(self._core, self._cmd_group)
return self._diagnostic
@property
def rxQuality(self):
"""rxQuality commands group. 5 Sub-classes, 3 commands."""
if not hasattr(self, '_rxQuality'):
from .Implementations.RxQuality import RxQualityCls
self._rxQuality = RxQualityCls(self._core, self._cmd_group)
return self._rxQuality
@property
def trx(self):
"""trx commands group. 5 Sub-classes, 3 commands."""
if not hasattr(self, '_trx'):
from .Implementations.Trx import TrxCls
self._trx = TrxCls(self._core, self._cmd_group)
return self._trx
def clone(self) -> 'RsCmwBluetoothMeas':
"""Creates a deep copy of the RsCmwBluetoothMeas object. Also copies:
- All the existing Global repeated capability values
- All the default group repeated capabilities setting \n
Does not check the *IDN? response, and does not perform Reset.
After cloning, you can set all the repeated capabilities settings independentely from the original group.
Calling close() on the new object does not close the original VISA session"""
cloned = RsCmwBluetoothMeas.from_existing_session(self.get_session_handle(), self._options)
self._cmd_group.synchronize_repcaps(cloned)
cloned.repcap_instance_set(self.repcap_instance_get())
self._sync_to_custom_properties(cloned)
return cloned
[docs]
def restore_all_repcaps_to_default(self) -> None:
"""Sets all the Group and Global repcaps to their initial values"""
self._cmd_group.restore_repcaps()
self.repcap_instance_set(repcap.Instance.Inst1)