Xmaximum

SCPI Commands :

FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
class XmaximumCls[source]

Xmaximum commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %, Unit: %

  • Delta_F_199_P_9: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float or bool: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float or bool: No parameter help available

  • Freq_Dev_Min_F_1: float or bool: No parameter help available

  • Freq_Dev_Max_F_1: float or bool: No parameter help available

  • Nominal_Power: float or bool: float Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Freq_Offset: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %, Unit: %

  • Delta_F_199_P_9: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float: No parameter help available

  • Freq_Dev_Min_F_1: float: No parameter help available

  • Freq_Dev_Max_F_1: float: No parameter help available

  • Nominal_Power: float: float Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
value: CalculateStruct = driver.multiEval.modulation.lowEnergy.lrange.xmaximum.calculate()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
value: ResultData = driver.multiEval.modulation.lowEnergy.lrange.xmaximum.fetch()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMAXimum
value: ResultData = driver.multiEval.modulation.lowEnergy.lrange.xmaximum.read()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘View TX Measurement - modulation statistics’. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.