Xminimum

SCPI Commands

FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
class Xminimum[source]

Xminimum commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal See ‘Reliability Indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINK: CONFigure:BLUetooth:MEASi:MEValuation:SCOunt:MODulation CMDLINK]) exceeding the specified limits, see ‘Limits (Modulation LE) ‘. Range: 0 % to 100 %, Unit: %

  • Delta_F_199_P_9: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float: No parameter help available

  • Freq_Dev_Min_F_1: float: No parameter help available

  • Freq_Dev_Max_F_1: float: No parameter help available

  • Nominal_Power: float: float Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal See ‘Reliability Indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINK: CONFigure:BLUetooth:MEASi:MEValuation:SCOunt:MODulation CMDLINK]) exceeding the specified limits, see ‘Limits (Modulation LE) ‘. Range: 0 % to 100 %, Unit: %

  • Delta_F_199_P_9: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs

  • Freq_Dev_Avg_F_1: float: No parameter help available

  • Freq_Dev_Min_F_1: float: No parameter help available

  • Freq_Dev_Max_F_1: float: No parameter help available

  • Nominal_Power: float: float Range: -99.99 dBm to 99.99 dBm, Unit: dBm

  • Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

calculate()CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
value: CalculateStruct = driver.multiEval.modulation.lowEnergy.lrange.xminimum.calculate()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘LE: Statistical Modulation Results ‘. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for CalculateStruct structure arguments.

fetch()ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
value: ResultData = driver.multiEval.modulation.lowEnergy.lrange.xminimum.fetch()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘LE: Statistical Modulation Results ‘. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.

read()ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LRANge:XMINimum
value: ResultData = driver.multiEval.modulation.lowEnergy.lrange.xminimum.read()

Returns the current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE coded PHY, see ‘LE: Statistical Modulation Results ‘. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return

structure: for return value, see the help for ResultData structure arguments.