Average

SCPI Commands :

FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %

  • Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz/50 μs

  • Freq_Offset: float or bool: float Range: -0.99999 MHz to 0.99999 MHz , Unit: Hz

  • Init_Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see ‘Modulation limits (LE) ‘. Range: 0 % to 100 %

  • Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

  • Max_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz/50 μs

  • Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz , Unit: Hz

  • Init_Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
value: CalculateStruct = driver.multiEval.modulation.cte.lowEnergy.le1M.average.calculate()

Returns current, average, standard deviation, absolute min (xmin) , absolute max (xmax) , and max CTE modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) . The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
value: ResultData = driver.multiEval.modulation.cte.lowEnergy.le1M.average.fetch()

Returns current, average, standard deviation, absolute min (xmin) , absolute max (xmax) , and max CTE modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) . The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:CTE:LENergy:LE1M:AVERage
value: ResultData = driver.multiEval.modulation.cte.lowEnergy.le1M.average.read()

Returns current, average, standard deviation, absolute min (xmin) , absolute max (xmax) , and max CTE modulation results for LE uncoded PHY (LE 1M PHY, LE 2M PHY) . The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.