Average

SCPI Commands :

CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
READ:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#PowerVsTime CMDLINKRESOLVED]) exceeding the specified limits, see [CMDLINKRESOLVED Configure.MultiEval.Limit.LowEnergy.Le1M.PowerVsTime#set CMDLINKRESOLVED]. Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Power: float or bool: float Peak power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Leakage_Power: float or bool: float Leakage power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Min_Avg_Pow: float or bool: float Difference between the peak power and the average power in the burst Range: -128.0 dBm to 30.0 dBm , Unit: dBm

class FetchStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#PowerVsTime CMDLINKRESOLVED]) exceeding the specified limits, see [CMDLINKRESOLVED Configure.MultiEval.Limit.LowEnergy.Le1M.PowerVsTime#set CMDLINKRESOLVED]. Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float: float Average power during the carrier-on state Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Power: float: float Peak power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Leakage_Power: float: float Leakage power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Min_Avg_Pow: float: float Difference between the peak power and the average power in the burst Range: -128.0 dBm to 30.0 dBm , Unit: dBm

class ReadStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Out_Of_Tol: float or bool: float | ON | OFF Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#PowerVsTime CMDLINKRESOLVED]) exceeding the specified limits, see [CMDLINKRESOLVED Configure.MultiEval.Limit.LowEnergy.Le1M.PowerVsTime#set CMDLINKRESOLVED]. Range: 0 % to 100 %, Unit: %

  • Nominal_Power: float: float Average power during the carrier-on state Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Power: float: float Peak power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Leakage_Power: float: float Leakage power Range: -128.0 dBm to 30.0 dBm , Unit: dBm

  • Peak_Min_Avg_Pow: float: float Difference between the peak power and the average power in the burst Range: -128.0 dBm to 30.0 dBm , Unit: dBm

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
value: CalculateStruct = driver.multiEval.powerVsTime.nmode.lowEnergy.lrange.average.calculate()

Returns the current, average, min, and max power results for LE normal mode. Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → FetchStruct[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
value: FetchStruct = driver.multiEval.powerVsTime.nmode.lowEnergy.lrange.average.fetch()

Returns the current, average, min, and max power results for LE normal mode. Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for FetchStruct structure arguments.

read() → ReadStruct[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:PVTime:NMODe:LENergy:LRANge:AVERage
value: ReadStruct = driver.multiEval.powerVsTime.nmode.lowEnergy.lrange.average.read()

Returns the current, average, min, and max power results for LE normal mode. Commands for uncoded LE 1M PHY (..:LE1M..) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ReadStruct structure arguments.