Ptype

SCPI Command :

CONFigure:BLUetooth:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>[:SETup]:PTYPe

class PtypeCls[source]

Ptype commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(segment=Segment.Default) → SegmentPacketType[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>[:SETup]:PTYPe
value: enums.SegmentPacketType = driver.configure.multiEval.listPy.segment.setup.ptype.get(segment = repcap.Segment.Default)

Specifies the packet type expected in the segment.

param segment:

optional repeated capability selector. Default value: S1 (settable in the interface ‘Segment’)

return:

packet_type: DH1 | DH3 | DH5 | E21P | E23P | E25P | E31P | E33P | E35P | RFPHytest | ADVertiser | RFCTe DH1, DH3, DH5: BR packet E21P, E23P, E25P, E31P, E33P, E35P: 2-DH1, 2-DH3, 2-DH5, 3-DH1, 3-DH3, 3-DH5 EDR packet RFPHytest: LE test packet ADVertiser: LE advertiser RFCTe: LE with CTE test packet

set(packet_type: SegmentPacketType, segment=Segment.Default) → None[source]

# SCPI: CONFigure:BLUetooth:MEASurement<Instance>:MEValuation:LIST:SEGMent<nr>[:SETup]:PTYPe
driver.configure.multiEval.listPy.segment.setup.ptype.set(packet_type = enums.SegmentPacketType.ADVertiser, segment = repcap.Segment.Default)

Specifies the packet type expected in the segment.

param packet_type:

DH1 | DH3 | DH5 | E21P | E23P | E25P | E31P | E33P | E35P | RFPHytest | ADVertiser | RFCTe DH1, DH3, DH5: BR packet E21P, E23P, E25P, E31P, E33P, E35P: 2-DH1, 2-DH3, 2-DH5, 3-DH1, 3-DH3, 3-DH5 EDR packet RFPHytest: LE test packet ADVertiser: LE advertiser RFCTe: LE with CTE test packet

param segment:

optional repeated capability selector. Default value: S1 (settable in the interface ‘Segment’)