Lrange

SCPI Commands :

READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
class LrangeCls[source]

Lrange commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Nominal_Power: float or bool: float Average power during the carrier-on state Range: -128.0 dBm to +30.0 dBm , Unit: dBm

  • No_Of_Exceptions: float or bool: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

class ResultData[source]

Response structure. Fields:

  • Reliability: int: decimal ‘Reliability indicator’

  • Nominal_Power: float: float Average power during the carrier-on state Range: -128.0 dBm to +30.0 dBm , Unit: dBm

  • No_Of_Exceptions: int: decimal Number of exceptions (channels ±3, ±4 … with an ACP above the ‘Exception PTx’ threshold ) Range: 0 to 99

calculate() → CalculateStruct[source]
# SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
value: CalculateStruct = driver.multiEval.sacp.nmode.lowEnergy.lrange.calculate()

Returns the ‘Spectrum ACP’ results for LE normal mode, see ‘View Spectrum ACP’. Commands for uncoded LE 1M PHY (..:LE1M.. ) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch() → ResultData[source]
# SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
value: ResultData = driver.multiEval.sacp.nmode.lowEnergy.lrange.fetch()

Returns the ‘Spectrum ACP’ results for LE normal mode, see ‘View Spectrum ACP’. Commands for uncoded LE 1M PHY (..:LE1M.. ) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.

read() → ResultData[source]
# SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:SACP:NMODe:LENergy:LRANge
value: ResultData = driver.multiEval.sacp.nmode.lowEnergy.lrange.read()

Returns the ‘Spectrum ACP’ results for LE normal mode, see ‘View Spectrum ACP’. Commands for uncoded LE 1M PHY (..:LE1M.. ) , LE 2M PHY (..:LE2M..) , and LE coded PHY (..:LRANge..) are available. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

return:

structure: for return value, see the help for ResultData structure arguments.