from ......Internal.Core import Core
from ......Internal.CommandsGroup import CommandsGroup
from ......Internal.StructBase import StructBase
from ......Internal.ArgStruct import ArgStruct
from ...... import enums
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]
class XminimumCls:
"""Xminimum commands group definition. 3 total commands, 0 Subgroups, 3 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._cmd_group = CommandsGroup("xminimum", core, parent)
# noinspection PyTypeChecker
[docs]
class ResultData(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability indicator'
- Out_Of_Tol: float: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see 'Modulation limits (LE) '. Range: 0 % to 100 %
- Delta_F_299_P_9: float: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Freq_Accuracy: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Max_Drift: float: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs
- Freq_Dev_Avg_F_1: float: No parameter help available
- Freq_Dev_Min_F_1: float: No parameter help available
- Freq_Dev_Max_F_1: float: No parameter help available
- Freq_Dev_Avg_F_2: float: No parameter help available
- Freq_Dev_Min_F_2: float: No parameter help available
- Freq_Dev_Max_F_2: float: No parameter help available
- Nominal_Power: float: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm
- Mod_Ratio: float: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1
- Freq_Offset: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Init_Freq_Drift: float: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz"""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_float('Out_Of_Tol'),
ArgStruct.scalar_float('Delta_F_299_P_9'),
ArgStruct.scalar_float('Freq_Accuracy'),
ArgStruct.scalar_float('Freq_Drift'),
ArgStruct.scalar_float('Max_Drift'),
ArgStruct.scalar_float('Freq_Dev_Avg_F_1'),
ArgStruct.scalar_float('Freq_Dev_Min_F_1'),
ArgStruct.scalar_float('Freq_Dev_Max_F_1'),
ArgStruct.scalar_float('Freq_Dev_Avg_F_2'),
ArgStruct.scalar_float('Freq_Dev_Min_F_2'),
ArgStruct.scalar_float('Freq_Dev_Max_F_2'),
ArgStruct.scalar_float('Nominal_Power'),
ArgStruct.scalar_float('Mod_Ratio'),
ArgStruct.scalar_float('Freq_Offset'),
ArgStruct.scalar_float('Init_Freq_Drift')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Out_Of_Tol: float = None
self.Delta_F_299_P_9: float = None
self.Freq_Accuracy: float = None
self.Freq_Drift: float = None
self.Max_Drift: float = None
self.Freq_Dev_Avg_F_1: float = None
self.Freq_Dev_Min_F_1: float = None
self.Freq_Dev_Max_F_1: float = None
self.Freq_Dev_Avg_F_2: float = None
self.Freq_Dev_Min_F_2: float = None
self.Freq_Dev_Max_F_2: float = None
self.Nominal_Power: float = None
self.Mod_Ratio: float = None
self.Freq_Offset: float = None
self.Init_Freq_Drift: float = None
[docs]
def fetch(self) -> ResultData:
"""SCPI: FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum \n
Snippet: value: ResultData = driver.multiEval.modulation.lowEnergy.le2M.xminimum.fetch() \n
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE
1M PHY, LE 2M PHY) , see 'View TX Measurement - modulation statistics'. The values described below are returned by FETCh
and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'FETCh:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum?', self.__class__.ResultData())
# noinspection PyTypeChecker
[docs]
class CalculateStruct(StructBase):
"""Response structure. Fields: \n
- Reliability: int: decimal 'Reliability indicator'
- Out_Of_Tol: float or bool: float Out of tolerance result, i.e. percentage of measurement intervals of the statistic count ([CMDLINKRESOLVED Configure.MultiEval.Scount#Modulation CMDLINKRESOLVED]) exceeding the specified limits, see 'Modulation limits (LE) '. Range: 0 % to 100 %
- Delta_F_299_P_9: float or bool: float Frequency deviation value Δf2 above which 99.9% of all measured Δf2 values occur Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Freq_Accuracy: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Max_Drift: float or bool: float Range: -0.99999 MHz/50 μs to 0.99999 MHz/50 μs , Unit: Hz/50 μs
- Freq_Dev_Avg_F_1: float or bool: No parameter help available
- Freq_Dev_Min_F_1: float or bool: No parameter help available
- Freq_Dev_Max_F_1: float or bool: No parameter help available
- Freq_Dev_Avg_F_2: float or bool: No parameter help available
- Freq_Dev_Min_F_2: float or bool: No parameter help available
- Freq_Dev_Max_F_2: float or bool: No parameter help available
- Nominal_Power: float or bool: float Average power during the carrier-on state Range: -99.99 dBm to 99.99 dBm, Unit: dBm
- Mod_Ratio: enums.ResultStatus2: float Modulation ratio Δf2 avg / Δf1 avg Range: 0 to 1
- Freq_Offset: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz
- Init_Freq_Drift: float or bool: float Range: -0.99999 MHz to 0.99999 MHz, Unit: Hz"""
__meta_args_list = [
ArgStruct.scalar_int('Reliability', 'Reliability'),
ArgStruct.scalar_float_ext('Out_Of_Tol'),
ArgStruct.scalar_float_ext('Delta_F_299_P_9'),
ArgStruct.scalar_float_ext('Freq_Accuracy'),
ArgStruct.scalar_float_ext('Freq_Drift'),
ArgStruct.scalar_float_ext('Max_Drift'),
ArgStruct.scalar_float_ext('Freq_Dev_Avg_F_1'),
ArgStruct.scalar_float_ext('Freq_Dev_Min_F_1'),
ArgStruct.scalar_float_ext('Freq_Dev_Max_F_1'),
ArgStruct.scalar_float_ext('Freq_Dev_Avg_F_2'),
ArgStruct.scalar_float_ext('Freq_Dev_Min_F_2'),
ArgStruct.scalar_float_ext('Freq_Dev_Max_F_2'),
ArgStruct.scalar_float_ext('Nominal_Power'),
ArgStruct.scalar_enum('Mod_Ratio', enums.ResultStatus2),
ArgStruct.scalar_float_ext('Freq_Offset'),
ArgStruct.scalar_float_ext('Init_Freq_Drift')]
def __init__(self):
StructBase.__init__(self, self)
self.Reliability: int = None
self.Out_Of_Tol: float or bool = None
self.Delta_F_299_P_9: float or bool = None
self.Freq_Accuracy: float or bool = None
self.Freq_Drift: float or bool = None
self.Max_Drift: float or bool = None
self.Freq_Dev_Avg_F_1: float or bool = None
self.Freq_Dev_Min_F_1: float or bool = None
self.Freq_Dev_Max_F_1: float or bool = None
self.Freq_Dev_Avg_F_2: float or bool = None
self.Freq_Dev_Min_F_2: float or bool = None
self.Freq_Dev_Max_F_2: float or bool = None
self.Nominal_Power: float or bool = None
self.Mod_Ratio: enums.ResultStatus2 = None
self.Freq_Offset: float or bool = None
self.Init_Freq_Drift: float or bool = None
[docs]
def calculate(self) -> CalculateStruct:
"""SCPI: CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum \n
Snippet: value: CalculateStruct = driver.multiEval.modulation.lowEnergy.le2M.xminimum.calculate() \n
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE
1M PHY, LE 2M PHY) , see 'View TX Measurement - modulation statistics'. The values described below are returned by FETCh
and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for CalculateStruct structure arguments."""
return self._core.io.query_struct(f'CALCulate:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum?', self.__class__.CalculateStruct())
[docs]
def read(self) -> ResultData:
"""SCPI: READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum \n
Snippet: value: ResultData = driver.multiEval.modulation.lowEnergy.le2M.xminimum.read() \n
Returns current, average, absolute min (xmin) , absolute max (xmax) , and max modulation results for LE uncoded PHY (LE
1M PHY, LE 2M PHY) , see 'View TX Measurement - modulation statistics'. The values described below are returned by FETCh
and READ commands. CALCulate commands return limit check results instead, one value for each result listed below. \n
:return: structure: for return value, see the help for ResultData structure arguments."""
return self._core.io.query_struct(f'READ:BLUetooth:MEASurement<Instance>:MEValuation:MODulation:LENergy:LE2M:XMINimum?', self.__class__.ResultData())